technological advancements Archivi

What are the Different Types of Water Pumps Going Along in the Market?

I am quite sure that most of you would have seen a water pump at home, if not in any industry. Water pumps are important for applications for example dewatering after a significant rain, supplying water at construction sites, watering crops and removing debris. There are different pumps and considering that their competences often overlay, choosing the correct pump can be sometimes tough.

But this blog will give you some of the valuable information about the water pumps, that will definitely prove helpful.

The two types of water pumps, popular in the market all over the world are mentioned below:

Positive Displacement Pumps

This kind of water pump make use of a flexible diaphragm to oust liquids through shrinkage and development. An antiquated hand pump offers an example of the working of a positive displacement pump works. Largely, these pumps offer the assistance of competence, particularly when working with high-viscosity liquids. They also come good in applications needing the formation of high pressure or extremely specific flow volumes.

Centrifugal Pumps

These depend on a rotating impeller that forcibly spins the water inside a particularly intended housing. The rotating act drives the water through the pump and housing through centrifugal force, bringing it to slide off the end of the impeller swiftly. Centrifugal pumps are filled with fluid to function appropriately. Almost every irrigation pump is a kind of centrifugal pump.

Specific Water Pump Types

There are also numerous water pumps models, these are

Submersible

These come good for underwater pumping. Mostly, submersible models are centrifugal pumps consisting a water-resistant electric motor and pump functioning as one unit. They are used in sewage services requiring the pumping of comparatively thin liquids without or with solids. A significant advantage of this sort of pump is that it doesn’t need priming because of being underwater already.

End suction

These are the most prevalent centrifugal pumps. They have horizontal shaft and a single impeller. Changing the type of impeller helps to make the pump compatible with numerous dirty and clean water services and levels of solids.

Trash Pumps

These are self-priming centrifugal pumps, which are put to use for dewatering at construction sites, mines, and utility pits. They are used for pumping dirty water with rocks, stones, mud, and other debris, along with abrasive materials.

Multistage Pumps

These are equipped with numerous impellers, delivering the additional pumping force essential for high-pressure uses. Though, they are not that good for pumping liquids containing some solids. These pumps are mainly employed in high-pressure services for example pipelines, RO and boiler feedwater.

Coming to a Conclusion

Now, this is all about the kinds of pumps which are going along well in the circuit. But, if we talk about the demand for water pumps all over the globe, it is on the rise because of the uses of these in a lot of industries and applications, for watering and dewatering.

Isostearic Acid Market Will Touch USD 463.2 Million in 2030

The isostearic acid market was USD 296.7 million in 2023, which will rise to USD 463.2 million, powering at a CAGR of 6.7%, by 2030.

This acid is significantly employed in pharmaceuticals, coatings, cosmetics, food & beverages, and various other sectors. Therefore, the increasing requirement for cosmetic and personal care products, mainly in APAC and Europe, is likely to have a positive impact on this industry.

An expanding supply of effective raw materials, mainly oilseeds, will boost the supply of this chemical. It is generally made from oleic acid, an unsaturated acid type. The main raw materials for oleic acid comprise rapeseed oil, soybean oil, sunflower oil, beef tallow, palm oil, and safflower oil.

As ingredients for personal care items, many chemical esters, involving monostearate, glycerol, isopropyl isostearate, and isostearate, are made from C18H36O2. Therefore, it is an essential element of personal care products like moisturizers, lipsticks, sun protection creams, and hair dyes.

The chemical esters category, on the basis of application, was the largest contributor to the isostearic acid market. Moreover, this category will remain the largest in the years to come. Chemical esters are employed in plasticizers as well as pigment adhesion promoters because of their improved dispersion, low residue formation, and quick absorption.

These factors aid in producing chemical esters a major intermediate material in personal care as well as industrial applications.

As a result, isostearic acid is extensively used in cosmetics, sun protection creams, haircare & baby care products, and liquid soaps. Its oxidation, as well as odor strength, assist in its application in personal care goods needing a greater shelf lifespan.

Europe was the largest contributor to the industry, mainly because of the surging cosmetics demand, coupled with the increasing use of biobased lubricants. In this regard, stringent environmental guidelines to decrease greenhouse gas levels in the environment will positively affect this industry.

APAC is also advancing at a significant pace, because of the increasing need for personal care items, primarily in emerging economies like India, Indonesia, and China. This can be because of the rising per capita disposable salary of the middle class, along with the mounting populace in India and China.

With the surging need for cosmetic and personal care products, the isostearic acid industry will continuously advance in the coming years.

Increasing Uses of Powder Metallurgy in Automotive Sector Boost Metallurgy Equipment Market

The metallurgy equipment market will touch USD 133.9 billion, propelling at a 3.3% compound annual growth rate, by 2030.

Digitalization is a key aspect of modern metallurgy. All practices are fully automated, whereby the utilization of robots is also expected in unsafe working areas, which essentially surges safety at the workplace.

The steelmaking equipment category, based on type, is likely to advance at the fastest rate, of approximately 3%, in the years to come. This can be attributed to the increasing usage of steel across sectors such as aerospace, automobile, marine, infrastructure, electronics, and equipment & machinery.

Moreover, steel is crush-and corrosion-resistant and, thus, enhances the durability and safety of automobiles. The increasing requirement for hybrid and electric vehicles is likely to further drive the demand for steel, boosting steelmaking equipment sales.

The milling machines category, based on equipment, accounted for the largest metallurgy equipment market share in recent years, and it will also propel at a significant rate during this decade. This can be because milling machines are highly versatile and can execute various functions, such as facing, turning, fillet making, chamfering, gear cutting, slot cutting, and drilling.

Moreover, with the increasing labor charges in developed countries, businesses are utilizing software programs to control the spindle speeds, tool changes, and axis in milling machines. In addition, businesses are accepting CNC technology to enhance the efficiency of milling machines and the quality of work.

In the past few years, the aerospace & defense category, based on application, was the largest contributor to the industry. This can be because of the increasing requirement for powdered aluminum, steel, and titanium in different aerospace & defense applications because of their capability to reduce the weight of aircraft components and enhance their effectiveness.

Moreover, the rising passenger traffic & defense budget in the APAC and European regions also help the progression of this industry. For example, APAC had shown a rise of approximately 200% in airline traffic in March 2022 as compared to March 2021.

Increasing Count of Construction Projects Boosts Underfloor Heating Market

The underfloor heating market will touch USD 7,945.4 million, advancing at a 7.0% compound annual growth rate, by 2030.

The growth of this industry is mainly because of the rising consciousness regarding cost-effective heating solutions as well as the growing count of construction projects.

Additionally, because of the increasing living standard of people in European and North American nations, the industry has witnessed significant advancement. Heating controls allow central heating systems to function automatically, with the user’s only effort being to temporarily override or update the program.

Moreover, a hydronic underfloor heating system comprises thermal actuators, network pipes, zone valves, manifolds, and wiring centers, which together provide more heat compared to an electric system at a lower operating price. Therefore, hydronic, under the hardware category led the industry, and it will further advance at a 7.2% compound annual growth rate in the year to come.

Furthermore, heating pipes, under the hydronic subcategory, was the largest contributor to the industry. This can be mainly because they are the key element in such a system.

The residential category, on the basis of end user, was the largest contributor to the underfloor heating market, in the past few years. This can be mainly because of the increasing count of smart home initiatives, coupled with the extensive refurbishment activities. Additionally, businesses are producing technologies for effective heating in new and renovated apartments.

The commercial category, on the other hand, is likely to advance at the second-fastest rate, in the years to come. Due to the surging need for effective floor heating in retail enterprises and workplaces, the category will continue to advance.

Europe led the industry in recent years, and it will further advance at the highest rate, of more than 7.0%, in the years to come. This is because of the active involvement of government organizations in protecting the environment, through the utilization of energy-effective systems.

Furthermore, the German New Building Energy Act concentrates on the necessities for the energy performance of buildings, the usage and issue of energy performance certificates, and the employment of renewable energy in buildings.

North America is likely to witness the second-fastest growth in the years to come. This is because of the continuous funding of new technologies by the major companies operating in this region.

With the increase in the number of construction projects, the underfloor heating industry will continuously grow in the coming years.

Why DG Sets are Increasingly Becoming Popular in Thailand?

In Thailand there is a significant development in various infrastructures such as resorts, hotels, hospitals, offices, and others, which is generating a large necessity for power backup solutions, for instance, DG sets.

Moreover, DG sets are also gaining popularity in Thailand due to the increasing need for power generation systems on islands with unreliable or no grid connectivity. For example, as per an article in Taipei Times, Ko Phaluai Island in Thailand has zero central electricity source, as a result, individuals utilize small diesel-fueled generators to provide power.

DG sets can be turned off or on in just a few seconds, therefore these machines have fast response and by utilizing a liquid fuel, they can function without interruption for a long duration.

Increasing Residential Societies in Thailand Boost DG Sets Sell

Funding by governments and real estate organizations is increasing in the residential sector of Thailand. The advancement of the residential sector is well accompanied by that of the sector of corporate because it is boosting the requirement for semi-urban and urban housing, which significantly increase the need for DG sets in residential area.

Moreover, the Thailand government has enlarged its funding to develop and enhance its infrastructure in the last few years, via public–private partnerships and public investments. During the last decade, the Thailand government invested around USD 116 billion for the infrastructure progression. This will generate a positive impact on the sales of DG sets in the nation.

Types of DG Sets Used in Thailand

DG sets can be categorized based on their power rating, types of DG sets include 5–75 kVA, 76–375 kVA, 376–750 kVA, and above 750 kVA. Among these, the above-750-kVA DG sets are the most extensively used type in Thailand. This is mainly due to the high-power necessity in the industrial settings in the nation.

The nation is a top producer of high-tech goods, particularly those related to electronics and automobiles. In addition, the emphasis of the nation is on the manufacturing of additional value-added products, for its economic advancement, which urges startups to increase their facilities of production, as a result, increasing the need for DG sets.

Coming to an End

The DG set sector in Thailand is likely to advance significantly in the years to come with the surging competition between major providers of DG set. Furthermore, new businesses are more involved in collaborating with other providers, therefore further increasing the levels of competition.

Charging Ahead: Exploring Trends and Innovations in the EV Fast Charging Infrastructure Market

There is no doubt in the fact that EVs are the future of the vehicle industry. But one thing that is still left to be addressed is the time taken to charge an electric vehicle.

Fast Charging Always the Question

The common question asked with respect to EV is always, will EVs be charged in the amount of time taken to fill up a tank of a vehicle with petrol, diesel or even gas. Innovations have been happening in order to decrease the time taken for the electric vehicles to charge.

Governments are trying to come up with initiatives to boost the sales of electric vehicles, but this dream can turn in reality only than there is a proper fast charging infrastructure all over the world.

Why Not Slow Charging for EVs?

Slow charging, usually takes 6 to 12 hours at a 3kW power. Fast charging is becoming common in public infra, can take 1 to 3 hours at a power of 7-22kW.

Ultra-fast charging is the need of the hour to achieve the dream of complete electrification of vehicles, as will the infra for charging an ever-growing vehicle count. This infra could, eventually, be arranged in charging hubs in city centres, as planners build shifting mobility necessities into city design.

Managing the Grid Well

The power grid will take a huge toll, with the fast charging infra coming in place for charging electric vehicles, so a lot of thinking will be put in place for developing such an infra for fast charging, that charges the vehicles in a jiffy, and at the same time do not put much burden on the grid.

If a lot of vehicles are charged at the same time, then there is every chance that the grid will overloaded. Innovative solutions are needed to be thought of to build a bridge between the demand and supply. Battery storage systems can also be thought of.

Can Ultra-Fast Charging Become a Reality

In the current scenario, as mentioned earlier, there is a call for an ultra-fast EV charging to say the least. But, can it become a reality anytime soon, remains the biggest question to be answered.

Regulatory hurdles are the biggest blockage to the development of an ultra-fast charging network, and there has to be continuous support from the governments to tech advances if it is to become a reality, anytime soon. Working with the network operators for electrification of transportation will hasten both the acceptance of EVs but also the rate at which charging infra is built out across the globe.

With an intention to quicken the adoption of EV, the demand of the fast charging infrastructure will grow substantially in the future, to reach USD 18,909.8 million by the end of this decade.

What is Automotive Ethernet? Everything You Need to Know

Today’s automobiles are producing and transmitting huge quantities of data in order to execute advanced driver assistance systems, cameras and sensors, onboard diagnostics, smart safety systems, and in-vehicle-infotainment systems. Such in-vehicle networks need much quicker speeds than what has historically been possible utilizing buses like LIN, CAN/CAN-FD, PSI5, FlexRay, SENT, and CXPI networks.

Also, the need for better integration between vehicle subsystems is propelling fundamental architectural changes with a focus on scalable architectures and complex topologies, including gateways connected to a backbone.

Beyond the technical needs, such in-vehicle networks are also required to be cost-effective, light in weight, and work in rough conditions and extensive temperature ranges. They also require to be tremendously dependable, especially for systems made to protect the security of the passengers.

Automotive Ethernet answers all of these demands.

The automotive ethernet market is witnessing growth and is projected to reach USD 10 billion by 2030.

What is Automotive Ethernet?

Vehicle Ethernet is a low-latency, high-speed network physical layer. Vehicle Ethernet is based on recognized ethernet standards, and modified for use in automobiles. It utilizes a single pair of unprotected twisted cables for lightweight and low price.

It is made to permit the transfer of high volumes of information between in-vehicle modules to aid contemporary powertrain, ADAS, comfort, and infotainment systems. There are numerous different automotive ethernet standards, such as 10GBASE-T1, 100BASE-T1, and 1000BASE-T1, which can transfer information at speeds from 100 Mb/s to 10 Gb/s.

Benefits of Automotive Ethernet

In vehicles, automotive ethernet components provide numerous advantages, including:

High data rates allow high-speed, high-capacity data communications

Low latency offers negligible delay for real-time systems such as ADAS
High dependability with good noise immunity
Light in weight, space-effective, and lucrative cabling
Based on deep-rooted standards from reputable standards bodies

Moreover, automotive ethernet has been proven to meet the needs of both capacity and integration. For the purpose of achieving high data rates and reliability, automotive ethernet cables shall use PAM3/PAM4 modulation as opposed to nonautomotive Ethernet.

In the short term, however, automotive Ethernet can transport data approximately 100 times more rapidly than a bus and is better suited for future vehicle networks that will need to be capable of meeting their needs in terms of both performance and flexibility. The CAN, CANFD, LIN, and other networks are still relevant but they may prove less important in the next few years.

Automotive Ethernet Standards

As new workings for automotive Ethernet developed and speeds became quicker, standards establishments released new test and compliance needs that automotive makers and their suppliers should meet. To ensure the interoperability of hardware and the safe, predictable operation of the vehicle in different situations and working conditions, severe restraints are placed on noise, signal levels, and clock characteristics.

The testing methods specified by the standards, though deep-rooted for stationary Ethernet networks have made new design challenges for numerous automotive engineers familiar with working with slower serial buses like CAN and LIN.

Browse detailed report on Automotive Ethernet Market Size, and Business Strategies

How Is Food Preservative Industry Supporting Chitosan Market Growth?

Factors such as the rising consumption of chitosan in the biomedical, wastewater treatment, agrochemical, food and beverage, cosmetic, and bioplastic industries and increasing research and development (R&D) activities being carried out in this compound are expected to facilitate the chitosan market growth during the forecast years (2021–2030). According to P&S Intelligence, the market was valued at $1.8 billion in 2020. Chitosan refers to biodegradable and non-toxic sugar, which is derived from the hard outer skeleton of crab, shrimp, and lobster.

In recent years, the increasing shift of the food preservative industry from formalin to chitosan has become a major trend in the chitosan market. Food preservatives are added to perishable food products to extend their shelf life. Consumption of formalin-based preservatives leads to the occurrence of cancer, lung diseases, and skin ailments. Owing to the harmful effects of formalin, chitosan is being increasingly used as a food preservative by food and beverage companies. Moreover, the higher biocompatibility of chitosan than formalin will also fuel its use as a food preservative in the coming years.

Currently, the prominent players in the chitosan market, such as Primex ehf, KitoZyme LLC, FMC Corporation, Axio Biosolutions Private Limited, Bio21 Co., Heppe Medical Chitosan GmbH, Meron Group, AgraTech International Inc., and Marshall Marine Products Private Limited, are focusing on product launches to consolidate their position. For instance, in April 2020, Axio Biosolutions Private Limited introduced a next-generation chitosan-based wound dressing named MaxioCel. This dressing offers high comfort and rapid healing to patients suffering from skin abrasions, pressure ulcers, venous leg ulcers, diabetic foot ulcers, post-surgical wounds, cavity wounds, and donor site wounds.

Geographically, Asia-Pacific (APAC) held the largest share in the chitosan market during the historical period, and it is also expected to demonstrate the fastest growth throughout the forecast period. This can be attributed to the chelating feature of chitosan, which makes it ideal for the treatment of heavy-metal-laden industrial effluents. Moreover, the increasing R&D activities being conducted in chitosan and the surging incidence of chronic diseases will also augment the market growth in the region in the forthcoming years.

Thus, the rising consumption of chitosan in the biomedical and food and beverage industries will support the market growth in the upcoming years.

Innovative Impressions: Navigating the Trends in the Printed Electronics Market and Future-Ready Applications

Electronics are manufactured with the help of silicon or other semiconductor materials for a fairly long time. The process is complex as well as time-consuming. However notable miniaturization, high-performance and low power is attained. Instead, making flexible silicon-based electronics is not that easy either.

For addressing this issue, a new tech has arisen, the printed electronics. This blog will provide some valuable info on this tech, concentrating on how it can be used in practical applications.

What on Earth are Printed Electronics

Talking of printed electronics tech, it is a novel way to produce electronics, with the use of standard graphic arts printing procedures, for example screen printing, flexography and inkjet printing, numerous electronic devices and circuits can be fabricated on unconventional substrates. Nearly any material can be put to use for this purpose, be it plastic, paper, and textiles.

These sorts of next-gen electronics can be ultra-thin, stretchable, flexible. Furthermore, printed electronics make use of a simple and cost-efficient low-temperature manufacturing procedure and are compatible with automated mass production printing by the roll-to-roll principle.

Creation of Hybrid Electronics

It will be rally tough for printed electronics to compete with conventional silicon-based electronics in terms of reliability, performance, and capability to handle intricate designs. But the possibility of inserting electronics in any object and that too at a low cost seems an enticing prospect. So, the printed electronics are seen as a complementary tech for the conventional electronics.

This understanding inspires the formation of hybrid electronics. These can have the best qualities of the two. Such a hybrid system comprises a single or numerous silicon ICs for computational power and wireless communications, and sensors, actuators and possibly display manufactured with the printed electronics tech. The system can moreover be integrated on a flexible substrate all together or split in a flexible or rigid part.

What are the Applications of Printed Technology?

It is because of all the unique characteristics; printed electronics can bring about new possibilities for numerous attractive applications that are either not practicable or not a perfect for the silicon-based electronics. Printed sensors are perhaps the most popular in the printed electronics and various sensor can be manufactured in all shapes and sizes on thin foils. Strain, force, humidity and gas sensors are some instances of the sensors.

Useful for IoT

Internet-of-Things products in healthcare, retail, wearables, industrial and consumer applications are remarkably benefitted by with the use of printed sensors.

An example of this is a fall detection system, equipped with sensors embedded under the floor in housing units for aged people and assisted living facilities. This system is able to monitor the position of the people and movements in a room and sense instances when the help of the caregivers is required on an urgent basis

Coming to a Conclusion

It is because of the growing consumer electronics industry all over the world, the demand for printed electronics is on the rise. This trend will continue in the future as well, and the total value will reach USD 42.4 billion, by the end of this decade.

Philippines Micromobility Market Will Reach USD 13,899.7 Million by 2030

The Philippines micromobility market is projected to be worth USD 13,899.7 million by 2030, growing at a CAGR of 158.6%, according to P&S Intelligence.

This growth can be ascribed to the growing requirement for decreasing air contamination and transportation price, thriving demand for well-organized micromobility facilities for first- and last-mile connectivity, and decreasing battery cost.

In recent years, the e-mopeds category, held the largest revenue share in the Philippines micromobility industry, on the basis of vehicle type. The same is also projected to advance at the highest development rate in the coming few years. this can be credited to the rising use of e-moped services because of their cost-effectiveness in nature.

The launch of swappable batteries has augmented the fleet uptime significantly, while also decreasing the working price, which has indeed taken the micromobility market in the Philippines toward success. Moreover, with the utilization of swappable batteries, the income generation of the e-scooter business can be enhanced, because such batteries not only cut a huge chunk of the charging prices but also advance the vehicle obtainability.

Additionally, numerous electric two-wheeler builders are also concentrating on fitting battery-swapping stations for commercial and public use. For example, in recent years, Komaihaltec Inc., Honda Motor Co. Ltd., and Honda Motor Co. Ltd., together introduced a demo project with a target to generate power with wind power in Romblon Island, the Philippines.

Additionally, micromobility companies are accepting new-age lithium-ion batteries, as such batteries are eco-friendlier, providing lessen charging time and augmented running economy than lead–acid batteries. The government is also helping lithium-ion battery businesses by providing inducements and tax credits. Thus, lessening the cost of lithium-ion batteries would remain to aid the micromobility industry in the Philippines in the coming years.

Hence, the growing requirement for decreasing air contamination and transportation price, thriving demand for well-organized micromobility facilities for first- and last-mile connectivity, and decreasing battery costs are the major factors propelling the Philippines micromobility market.