Market analysis Archivi - Business NewsWire

What are the Different Types of Water Pumps Going Along in the Market?

I am quite sure that most of you would have seen a water pump at home, if not in any industry. Water pumps are important for applications for example dewatering after a significant rain, supplying water at construction sites, watering crops and removing debris. There are different pumps and considering that their competences often overlay, choosing the correct pump can be sometimes tough.

But this blog will give you some of the valuable information about the water pumps, that will definitely prove helpful.

The two types of water pumps, popular in the market all over the world are mentioned below:

Positive Displacement Pumps

This kind of water pump make use of a flexible diaphragm to oust liquids through shrinkage and development. An antiquated hand pump offers an example of the working of a positive displacement pump works. Largely, these pumps offer the assistance of competence, particularly when working with high-viscosity liquids. They also come good in applications needing the formation of high pressure or extremely specific flow volumes.

Centrifugal Pumps

These depend on a rotating impeller that forcibly spins the water inside a particularly intended housing. The rotating act drives the water through the pump and housing through centrifugal force, bringing it to slide off the end of the impeller swiftly. Centrifugal pumps are filled with fluid to function appropriately. Almost every irrigation pump is a kind of centrifugal pump.

Specific Water Pump Types

There are also numerous water pumps models, these are

Submersible

These come good for underwater pumping. Mostly, submersible models are centrifugal pumps consisting a water-resistant electric motor and pump functioning as one unit. They are used in sewage services requiring the pumping of comparatively thin liquids without or with solids. A significant advantage of this sort of pump is that it doesn’t need priming because of being underwater already.

End suction

These are the most prevalent centrifugal pumps. They have horizontal shaft and a single impeller. Changing the type of impeller helps to make the pump compatible with numerous dirty and clean water services and levels of solids.

Trash Pumps

These are self-priming centrifugal pumps, which are put to use for dewatering at construction sites, mines, and utility pits. They are used for pumping dirty water with rocks, stones, mud, and other debris, along with abrasive materials.

Multistage Pumps

These are equipped with numerous impellers, delivering the additional pumping force essential for high-pressure uses. Though, they are not that good for pumping liquids containing some solids. These pumps are mainly employed in high-pressure services for example pipelines, RO and boiler feedwater.

Coming to a Conclusion

Now, this is all about the kinds of pumps which are going along well in the circuit. But, if we talk about the demand for water pumps all over the globe, it is on the rise because of the uses of these in a lot of industries and applications, for watering and dewatering.

Isostearic Acid Market Will Touch USD 463.2 Million in 2030

The isostearic acid market was USD 296.7 million in 2023, which will rise to USD 463.2 million, powering at a CAGR of 6.7%, by 2030.

This acid is significantly employed in pharmaceuticals, coatings, cosmetics, food & beverages, and various other sectors. Therefore, the increasing requirement for cosmetic and personal care products, mainly in APAC and Europe, is likely to have a positive impact on this industry.

An expanding supply of effective raw materials, mainly oilseeds, will boost the supply of this chemical. It is generally made from oleic acid, an unsaturated acid type. The main raw materials for oleic acid comprise rapeseed oil, soybean oil, sunflower oil, beef tallow, palm oil, and safflower oil.

As ingredients for personal care items, many chemical esters, involving monostearate, glycerol, isopropyl isostearate, and isostearate, are made from C18H36O2. Therefore, it is an essential element of personal care products like moisturizers, lipsticks, sun protection creams, and hair dyes.

The chemical esters category, on the basis of application, was the largest contributor to the isostearic acid market. Moreover, this category will remain the largest in the years to come. Chemical esters are employed in plasticizers as well as pigment adhesion promoters because of their improved dispersion, low residue formation, and quick absorption.

These factors aid in producing chemical esters a major intermediate material in personal care as well as industrial applications.

As a result, isostearic acid is extensively used in cosmetics, sun protection creams, haircare & baby care products, and liquid soaps. Its oxidation, as well as odor strength, assist in its application in personal care goods needing a greater shelf lifespan.

Europe was the largest contributor to the industry, mainly because of the surging cosmetics demand, coupled with the increasing use of biobased lubricants. In this regard, stringent environmental guidelines to decrease greenhouse gas levels in the environment will positively affect this industry.

APAC is also advancing at a significant pace, because of the increasing need for personal care items, primarily in emerging economies like India, Indonesia, and China. This can be because of the rising per capita disposable salary of the middle class, along with the mounting populace in India and China.

With the surging need for cosmetic and personal care products, the isostearic acid industry will continuously advance in the coming years.

Corrugated Boxes Market Will Reach USD 359.6 Billion By 2030

The global corrugated boxes market is projected to be worth USD 359.6 billion by 2030, growing at a CAGR of 4.6%. This development can be credited to the increasing requirement for light in weight and easy packing solutions across diverse sectors.

The surge in the acceptance of corrugated boxes in comparison to other padding solutions, like self-retention packaging, sealing boxes, and plastic boxes, is primarily because of the rising concerns over their sustainability in the value chain.

As corrugated material used is simple to recycle, it is experiencing a high requirement for wrapping applications. Furthermore, retail-ready packaging saves time and labor expenses. Other benefits comprise its ecological nature and lesser price compared to other items, which continue to propel the industry worldwide.

Usually, packing is likely after use, which has directed to a huge surge in the quantity of waste in landfills, therefore resulting in damaging ecological effects. However, builders have now initiated using cutting-edge technologies for slicing and compaction, which aid in the reprocessing of such boxes.

In 2022, the C category held the largest Corrugated Boxes Market share, at approximately 40%. This flute kind discovers high utilization in corrugated boxes for shipping aims, mainly for the padding of glass items, dairy items, furniture, and motorized components.

For example, industry companies offer these boxes for the wrapping of engines, windshields, metallic body pieces, car headliners, and airbags. Such boxes can be loaded and have a better compression forte as they feature a corrugated medium that is rather thick.

One of the major reasons propelling the industry is the development of the wrapping sector worldwide. The surge in the requirement for manufactured goods, ranging from television sets and smartphones to consumable items, like candies, has boosted the requirement for corrugated material, particularly corrugated boxes, for storing and transport drives, credited to their high physical strength and crush resistance.

Furthermore, with the surge in the standard of living, particularly in Brazil, China, and India, there has been a surge in the requirement for items like electronics, cosmetics, and food and beverages. Corrugated boxes are typically suggested for shipping such items, as they are pressure-resilient and more solid than regular cardboard wrapping.

Last Mile Delivery Market Will Reach USD 121.2 Billion by 2030

The last mile delivery market was USD 27.1 billion in 2022, and it will reach USD 121.2 billion, propelling at a 20.6% compound annual growth rate, by 2030.

The progression of the industry is mainly attributed to the surging utilization of omnichannel retailing, as well as the significant increase in internet penetration in emerging economies, including Thailand, Indonesia, and India.

In 2022, the B2B category, based on service, dominated the industry, with approximately 50% share. This can be attributed to the fact that it provides numerous advantages to online retailers to attract B2B consumers, for instance, decreased delivery time, easy options of payment, doorstep delivery of heavy parts, heavy discounts on bulk buying, and decreased management expenses.

The B2C category will observe faster growth in the years to come. This is because of the shifting customer purchasing behavior, growing technical knowledge about the utilization of online platforms and smartphone apps, and, development in organized and omnichannel retailing.

Based on application, the e-commerce category will observe the fastest last mile delivery market growth, propelling at approximately 20% CAGR, in the years to come. This is because of the growing customer base, customers’ expectations for fast and free shipping, demographic shift, and competitive pricing. Therefore, businesses are now focusing on overcoming the challenging delivery schedule of conventional logistics.

A major trend being observed in the industry is the implementation of autonomous vehicles for delivery. AI is a major technology for autonomous driving systems, as it is the only tech that allows real-time and reliable object recognition around automobiles. The implementation of autonomous vehicles will significantly decrease delivery expenses, therefore driving the e-commerce sector growth.

In 2022, the North American industry accounted for a significant share, generating USD 9 billion. This is because of the high rate of adoption of advanced technologies in the continent, as well as the rising rate of efficiency expected by last-mile delivery.

Automotive Manufacturing Equipment Market Is Driven by the Increasing Number of Electric and Hybrid Vehicles

The automotive manufacturing equipment market is around USD 6,810.5 million in 2023, and it will advance at a rate of 11.3% by the end of this decade, to touch USD 14,260.4 million by 2030.

This is credited to the fast-growing vehicle requirement and the growing acceptance of robotics and automation technologies for coping with the booming automotive requirement.

In the tech world, industries are shifting from conformist methods to cutting-edge production technologies, such as ML and AI. These technologies are there in the entire automotive industry, helping it to meet the requirement for vehicles on time.

These similarly help control systems and communicate with other apparatus so there is no effect on the work. Numerous organizations have accepted AI and advanced technologies, because of their several benefits, to advance quality, help meet the requirement on time, boost the supply chain, and operate functions easily.

The robot category will have the fastest growth, about 12.5%, in the near future. In the vehicle manufacturing sector, robots are the most significant part of manufacturing processes because they work in the best way with enhanced task management. Also, robots can continually do tasks with quality, high consistency, less error rate, and greater productivity.

The automatic category will grow at a higher rate in the automotive manufacturing equipment market, of about 11.5%, in the years to come. In the automobile industry, automatic technologies are accepted extensively because of their efficiency of work, high quality, and supreme productivity.

Similarly, automatic manufacturing technologies can achieve tasks without the participation of humans, as a result of which the production cost is reduced with supreme production output. Additionally, these technologies support in making the production facilities more advanced and efficient.

Growing Automotive Sector Boosts Automatic Number Plate Recognition System Market

The automatic number plate recognition system market is estimated to generate USD 3,219.9 million in 2023, which will touch USD 6,010.8 million, propelling at a 9.5% compound annual growth rate, by 2030.

The growth of this industry is because of the increasing usage in agencies, such as parking, toll plazas, traffic management, and police force; the growing automotive sector; and the rising trend for pay-per-use roads.

Moreover, the high capital funding mainly in developing countries, coupled with the increasing acceptance of advanced systems and technology by different governments to control traffic, also boosts the industry.

Automatic Number Plate Recognition System Market

In 2022, the fixed category, based on type, was the largest contributor to the industry, and it will remain the largest throughout this decade. This can be because of the increasing utilization of these systems for traffic management and the rising transformation in road infrastructure.
In 2022, the hardware category, based on component, was the higher contributor to the automatic number plate recognition system market, and it will remain the higher during this decade. This can be because of the arrival of IoT devices into hardware and the speedy incorporation of hardware parts into cloud-based software solutions.

The electronic toll collection category, on the basis of application, is likely to advance at the highest rate during this decade. This is primarily because of the fact that it is an effective tool for tolling systems.

In 2022, the government category, based on end user, led the industry, and it will remain leading throughout this decade. This can be because of the rising count of government infrastructural projects, coupled with the increasing acceptance of developed technologies by public safety agencies.

Navigating the Dicyclopentadiene Market Landscape

The dicyclopentadiene market will touch USD 1,373.9 million, propelling at a 5.3% compound annual growth rate, by 2030.

The growth of the industry is mainly because of the increasing utilization of dicyclopentadiene for resins, polymers, and various other specialty chemicals. Furthermore, because of its extremely reactive nature, it can be utilized as an intermediate for the production of various performance chemicals utilized in packaging, automotive & marine, and building & construction industries.

In recent years, the UPR category, based on type, accounted for the largest industry share, and it will generate USD 644.8 million, advancing at approximately 5.4% CAGR, by 2030.

The UPR grade is a key element in the production of coatings, varnishes, paints, rubber, pesticides, adhesives, insecticides, and other products. This is attributed to the fact that it comprises lesser trimers and co-dimers, displays enhance color characteristics compared to other resins and has better functional and mechanical properties.

Whereas, the high purity category will observe the highest growth, of 5.7% in the years to come. This is because of the increasing requirement for specialty & fine chemicals.

The hydrocarbon resins category, based on application, will observe the fastest dicyclopentadiene market growth, of approximately 5.7%, in the years to come. The main applications of hydrocarbon resins are labels, hot melts, and PSA tapes. These intermediates are also utilized as a tackifier during the production of products such as printing inks, paints, adhesives, rubbers, and coatings.

Based on industry, the building & construction category accounted for the largest share, in the past few years. Furthermore, it will generate a revenue of USD 328.7 million, propelling at a 5.3% CAGR, by 2030.

In the past, APAC accounted for the largest dicyclopentadiene industry share, and it will advance at a 5.4% compound annual growth rate throughout this decade. This is because of the increasing requirement for this chemical in the plastic and resin sector in this continent.

India Aerosol Market Driven by Surging Need for Aerosols in Numerous Industries

The major drivers for the India aerosol market to $891.13 million by 2030 will be the skyrocketing investments in the research and development in the production units, extensive government support, and the surging need for aerosols in numerous industries including manufacturing and automotive industries. The outbreak of COVID-19 ruptured the entire logistical network of this market because of the temporarily shutting down of production units as lockdown was imposed in India. Furthermore, the lowering trading activities exerted a halt on the sales of these materials.

Within the application segment, the personal care category holds the biggest India aerosol market share, and it will show this trend in the coming years as well. This can be ascribed to the snowballing demand for body care products (sun protection products, self-tanning & skin-whitening lotions, and hydrating creams), personal care products (cream foundation, gel toothpaste, foams & gels, and deodorants & antiperspirants), and hair care products (shampoos, hair shines, hair mousses, and hairsprays & styling sprays). Furthermore, the surging inclination toward personal hygiene care is laying the firm foundations for the category’s growth.

Moreover, antiperspirants/deodorants rule the personal care category in the India aerosol market because of the growing awareness of body odor problems and personal hygiene. The spray paints category will potentially grow in the coming years because of the economic viability and versatility of spray paints. There is a rising inclination for this category in comparison to the plastic, wooden, and metallic applications. There is a rising utilization to re-spray or restore aviation and automotive components. Additionally, there is a surging application of spray paints to fill the scratches in industrial machinery.

Similarly, the India aerosol market was ruled by air freshener products in the past few years within the residential product type. This can be primarily attributed to the skyrocketing demand for the refreshing ambiance in cars and homes that is free of undesirable odors. Apart from creating a refreshing environment, it also enlightens the mood of people. The absence of volatile organic compounds and the increasing inclination toward air hygiene will augment growth in the market.

When segmented on the distribution channel, the India aerosol market is categorized into hypermarkets/supermarkets, convenience/department stores, and others. Sales via hypermarkets/supermarkets are predicted to advance at the swiftest CAGR in the coming years. This is because of the fast modernization in the retail sector, which in turn, will increase the count of the number of supermarkets and hypermarkets, particularly in metropolitan cities. All of this will propel growth in the market.

Innovations Happening in Anode Materials in Automotive Lithium-Ion Batteries

There is absolutely no doubt in the fact that we are living in a world that is ruled by electric vehicles. Electric vehicles are ruled by batteries, and especially lithium-ion batteries. These batteries have got four major parts, and anode is one of them. We will read a bit about anode material in the lithium-ion batteries in this blog.

It is because of the alarms of increasing pollution and climate change, researchers all over the world are trying to improve the EVs for making make them a more striking alternative to conventional vehicle. Much of the work is being done for making the batteries of the EVs better.

Apart from the sturdiness, safety, and autonomy, fast charging is also the need of the hour. Right now, approximately 40 minutes are taken by EVs to recharge though conventional cars can be refueled in a jiffy. There is a need to bring down the charging time considerably.

Talking of the way of reducing the time taken to charge lithium-ion batteries is to increase the diffusion rate of lithium ions, which can be done by increasing the interlayer distance in the carbon materials deployed in the anode batteries. While there is some sort of success in this regard by presenting nitrogen impurities there is no method to control interlayer distance or to distillate the doping element.

A Japanese team, not long ago founded a method for anode fabrication, able to provide fast charging of Lithium-ion batteries. The results were issued online in 2021 in Chemical Communications.

Which is Finest Anode for a Battery?

Silicon is the most excellent anode material for lithium-ion batteries. Amongst all the recognized elements, Si has the maximum volumetric and gravimetric capacity and is also reasonably priced.

Are lithium-ion Batteries Harmful for the Environment?

These have a lot fewer toxic metals than their counterparts that has toxic metals, for example cadmium or lead, they are mostly considered to be a non-harmful waste.
In the entire world, there has been much talk about shifting to electric vehicles, but what challenges stand inn the way are already been discussed in this blog, and how things are shaping up for mitigating all of them.

Powering the Future: Second-Life Automotive Lithium-Ion Battery Market Insights and Sustainability Trends

According to a market research expert working at P&S Intelligence, the second-life automotive lithium-ion battery market will propel at a considerable rate of 23.1% by the end of this decade to reach a value of USD 7,392 million.

The expensive battery reprocessing process and the increasing acceptance of EVs all over the world are the main factors powering the industry growth of the second-life automotive lithium-ion batteries.
Passenger car had the largest share in the past, on the basis of vehicle type. The category will also grow the fastest in the future, continue holding the major share.

This is because of the support from the governments in the U.S. and China for producing new energy cars, and growing requirement for fully e-passenger cars with a feature of high-range per charge.
Base station category led the market, based on application. This is as a result of the fact that battery systems are progressively put to use in telecoms base stations, as an aggregated and highly distributed asset for frequency containment disturbances reserve.

APAC was the leader of the second-life automotive lithium-ion battery market globally and it will be like this in the future as well. The region is led by China.
Also, China targets to attain domestically 50% EV share by the year 2025. This will be a potential market for second-life batteries.

The European market will witness the fastest growth, as a result of the snowballing sales of electric vehicles. Also, the strategic action plan for batteries in the region was accepted in the past.
Under this plan, improvement in building a battery value chain, as well as acceptance of extraction of raw materials, processing and sourcing of battery materials, production of cells and battery systems, along with recycling and reusing, is projected to be done.

Li-ion batteries has only 2–7% of lithium and gaining it through recycling is five times more expensive than finding lithium directly from natural sources. The sole material good for recycling in the procedure is cobalt.